The PHX-150 has proven itself to be the leader in the mold remediation industry. Drew Carlson from Clayton Group Services ran several field tests and sent the samples to PK Jarvis Microbiologies Laboratory for analysis.

After reviewing the test results Drew remarked, " The results of the testing were remarkable. After witnessing the dry ice blasting process first hand, I'm convinced this approach will provide a cost effective alternative to traditional mold remediation methods".

Would you like to see a Dry Ice Blasting Demonstration at your facility?

Click here to request a demonstration.

Mold Removal

(click picture for larger view)

Before

After

Return to Main Application Page

The PHX-150 Advantage

1) It’s speed. The PHX-150 is capable of removing mold up to 1 square foot in 3 seconds. This combination of speed with its ability to get into corners, cracks and crevices provides savings of up to 16 times that of conventional methods.

2) It’s ability to remove mold without damage to wood, pipes, wires etc. The PHX-150 has a detachable fragmentor that breaks up the 1/8” diameter dry ice pellets into small sugar sized granules. These smaller particles are far less destructive than pellets and provides a more uniform cleaning.

3) It’s ability to adjust ice rates with the turn of a dial. Most mold remediation companies using the PHX-150 are finding less ice is often better. The ice rate on the PHX-150 can be turned down to 1 lb/minute and still maintain high removal speeds. With ice costs ranging from $.15/lb to $.40/lb this feature provides significant savings.

4) It’s ability to use over 100 feet of blast hose. This unique feature provides solutions to mold removal when faced with remote access challenges. Even at distances over 100 feet, the PHX-150 maintains full blasting capabilities.

Need more information? 

Click here to send us your

contact information.